Products & Solutions
-
Flow Metering
- Flowmeters
- Clamp-On Ultrasonic Flowmeters
- Electromagnetic Flowmeters
- Mass Flowmeters & Controllers
- Mechanical Flowmeters for Gas
- Rotameters
- Turbine Flowmeters for Water
- WT Turbine Meter / 2" to 8" / Digital Readout
- WS PE Turbine Meter / temp 180, 200 degC
- WP-QF Turbine Meter for High Pressures (Cold & Hot)
- WP Dynamic Turbine Meter / 130degC / sizes 1 ½” to 16”
- WP QF Turbine Meter / sizes 20” to 32”
- Meistream Plus Turbine Meter / 50degC / High Accuracy
- WP Dynamic Turbine Meter / 50degC / sizes 1 ½” to 16”
- AN130 Multi-jet Water Meter / sizes ½” to 1 ½” / 130deg
- 620 Piston Water Meter / 1/2" to 1 1/2"
- 405S Multi-jet Water Meter - sizes ½” to 1 ½”
- Residia Single Jet Water Meter / 1/2" to 3/4"
- Vortex Flowmeters
- Gas Pressure Regulators
- PLEXOR Inspection System for Pressure Regulating Systems
- Flowmeters
- Gas & Flame Detection, Environment Monitoring
- Material Testing
- Remote Asset Monitoring
- Specialty Applications
Select Application
Select Category
Flowmeters
- Flowmeters
- Gas Pressure Regulators
- PLEXOR Inspection System for Pressure Regulating Systems
Flow Metering
L Rotameters / 1/8”to 1/4”
L series rotameters are rugged PTFE-PFA flow meters for low to medium flow measurements of highly corrosive or ultra-pure liquids. Wetted inert components are surrounded by structurally rigid materials representing a unique combination of a rugged mechanically rigid frame and chemically inert wetted parts. Each meter is provided with a safety shield for protection of personnel.
Flow meters are supplied with or without built-in needle valves and they are panel mountable.
Specifications
- Available Connections/Fittings:
- 3/8” NPTF (Low Range)
- 1/4” NPTF (Low Range)
- 1/2” NPTF (High Range)
- 3/4” NPTF (High Range)
- Pmax: 100 psi
- Tmax: 120 deg C
| Connection Size(inch) | Max Flow (Water) |
| 1/4” NPTF | 1 l/min |
| 3/8” NPTF | 5 l/min |
| 1/2” NPTF | 20 l/min |
| 3/4” NPTF | 45 l/min |
