Products & Solutions
- Gas & Flame Detection, Environment Monitoring
- Remote Asset Monitoring
-
Flow Metering
- Flowmeters
- Turbine Flowmeters for Water
- WT Turbine Meter / 2" to 8" / Digital Readout
- WS PE Turbine Meter / temp 180, 200 degC
- WP-QF Turbine Meter for High Pressures (Cold & Hot)
- WP Dynamic Turbine Meter / 130degC / sizes 1 ½” to 16”
- WP QF Turbine Meter / sizes 20” to 32”
- Meistream Plus Turbine Meter / 50degC / High Accuracy
- WP Dynamic Turbine Meter / 50degC / sizes 1 ½” to 16”
- AN130 Multi-jet Water Meter / sizes ½” to 1 ½” / 130deg
- 620 Piston Water Meter / 1/2" to 1 1/2"
- 405S Multi-jet Water Meter - sizes ½” to 1 ½”
- Residia Single Jet Water Meter / 1/2" to 3/4"
- Clamp-On Ultrasonic Flowmeters
- Electromagnetic Flowmeters
- Mechanical Flowmeters for Gas
- Rotameters
- Vortex Flowmeters
- Mass Flowmeters & Controllers
- Turbine Flowmeters for Water
- Gas Pressure Regulators
- PLEXOR Inspection System for Pressure Regulating Systems
- Flowmeters
- Material Testing
- Specialty Applications
Select Application
Select Category
Gas Pressure Regulators
- Flowmeters
- Gas Pressure Regulators
- PLEXOR Inspection System for Pressure Regulating Systems
Flow Metering
1800, 2000 Industrial Regulators
1800 series industrial regulators are lower pressure models that have a maximum inlet pressure of 150 psi and offer outlet pressures ranging from 3.5″ w.c. to 5 psi.
2000 series higher pressure models allow a maximum inlet pressure of 150 psi and outlet pressures ranging from .5 psi to 15 psi.
The 1800 Series can be ordered as Full Relief, Partial Relief or No Relief Regulator. 2000 Series Regulators are non-relieving. Both models are available with overpressure shutoff, underpressure shutoff and monitor capabilities.
Specifications
Low Pressure Regulator Models
| Model | Description |
| 1803/1803M | Non-Relieving |
| 1813 | Partial Internal Relieve |
| 1813B | Full Capacity Internal Relief |
| 1823 | Non-Relieving With UPSS |
| 1833 | Partial Internal Relief and UPSS |
| 1833B | Full Capacity Internal Relief and UPSS |
| 1843 | Partial Internal Relief and OPSS |
| 1843B | Full Capacity Internal Relief and OPSS |
| 1853 | Partial Internal Relief with UPSS and OPSS |
| 1853B | Full Capacity Internal Relief with UPSS and OPSS |
| 1883/1883M | Non-Relieving With OPSS |
| 1893 | Non-Relieving With UPSS and OPSS |
High Pressure Regulator Models
| Model | Description |
| 2003/2003M | Non-Relieving |
| 2023 | Non-Relieving With UPSS |
| 2083/2083M | Non-Relieving With OPSS |
| 2093 | Non-Relieving With UPSS and OPSS |
- UPSS: Under Pressure Shut-Off
- OPSS: Over-Pressure Shut-Off
| Main Spring (1800) | Main Spring (2000) | OPSS Spring | Orifice Size |
| 3.5 - 6” W.C | 0.5 - 1 psig | 14 - 28” W.C | 1/4“ |
| 5.5 - 8” W.C | 1 - 2.5 psig | 1 - 2 psig | 3/8” |
| 8.5 - 14” W.C | 2.5 - 5 psig | 2 - 3 psig | 1/2“ |
| 14.5 - 28” W.C | 5 - 10 psig | 3 - 5 psig | 5/8“ |
| 1 - 2 psig | 10 - 15 psig | 5 - 8 psig | 3/4“ |
| 1.5 - 2.5 psig | 8 - 14 psig | 7/8“ | |
| 2 - 3 psig | 14 - 20 psig | 1” | |
| 3 - 5 psig | 1 ¼ ” |
